Christiansphotoblog

Tuesday, January 12, 2016

Spring Challenge And Tutorials

LED Orb

Example:

Equipment needed:

An LED (or a few LEDs to make it brighter)

Battery.
Battery Clip.
Push button to make a switch.
Wire.
A weight: literally anything to make the LED at the end of the wire heavy, so it spins easily.
Resistor(s): The value depends on the type and number of LEDs you use.
Soldering iron, solder, wire cutters, and PVC tape.

Tips

spin from the middle of the orb to achieve a perfect orb.

Wednesday, January 6, 2016

leading lines. to get this photo the place had to of been destroyed.

rule of thirds, leading lines. in order to take this photo you would need to have some type of experience climbing.

leading lines. to take this photo you would need to be in a place where the climate changes

to take this photo you would need to somewhere dark so you could see the stars better.

for this photo you would need a camera that is water prof of a case for it, ad you will also need to know how to scuba dive.

Thursday, December 3, 2015

pocket wizard

1. 1
2. you put the pocket wizard on a channel and connect the wizard with the proper cable while also putting the camera on the same channel as the wizard.
3. 10
4. the light will be a sold red when sending or receiving a signal.
5.you will need the had held help pocket wizard which will trigger the camera which then triggers the flash by just connecting the proper cable and setting the wizard plus one x and the putting he camera on the same channel.